 |
"Unbeatable high-speed/high temperature performance" Ultimate
protection for hard-driven, high-performance vehicles. Dramatically reduces friction
and wear for improved performance. Excels at both high and low temperature performance.
Outperforms other conventional and synthetic greases. Product
Code: GRG Applications
AMSOIL
Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance
standards of the National Lubricating Grease Institute, GC for wheel bearing applications
and LB for chassis applications. | Load
Capacity
AMSOIL
Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated
for high-temperature/high-speed applications. Yet, it excels in the protection
of low-speed bearings, a job usually reserved for heavy-duty products. Components
get the load bearing capacity of a heavy-duty grease without sacrificing the high-temperature
protection of a multi-purpose. Anti-Wear
Performance
AMSOIL Series 2000 Racing Grease passes
the Ford Film Strength Endurance Test with a 16 point margin (see graph). Most
nonsolid-fortified racing greases, synthetic or conventional, do not pass. AMSOIL
Series 2000 Racing Grease keeps greased components in like-new condition. All-Temperature
Protection
AMSOIL Series 2000 Racing Grease pairs
a high Viscosity Index synthetic base oil with a top-quality lithium complex thickener,
known for its extraordinary performance in temperature extremes. AMSOIL Series
2000 Racing Grease offers excellent low-temperature pumpability and high-temperature
consistency for dependable all-temperature protection. Oxidation
Resistance and Inhibition
AMSOIL Series 2000 Racing
Grease’s excellent oxidation resistance and robust package of oxidation inhibitors
prevent grease breakdown and component surface damage in the highly oxidizing
conditions associated with high temperature operations. Friction
Reduction
AMSOIL Series 2000 Racing Grease maximizes
power through-put and fuel efficiency by minimizing friction. The extra power
given by Series 2000 improves acceleration and top-end speed. Washout
Resistance and Corrosion Inhibition
AMSOIL Series
2000 Racing Grease resists water wash out and inhibits rust and other forms of
corrosion.
| Typical
Technical Properties | | AMSOIL
Synthetic Lithium Complex Racing Grease | NLGI
GC-LB | Series
2000 Racing Grease | | Thickener | NR* | Lithium
Complex | | NLGI
Consistency Grade | NR* | 2
EP | | NLGI
Performance Grade | NR* | GC-LB |
| Penetration
(ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes | 220
- 340 | 265
- 295 | | Dropping
Point (ASTM D-566) °C [77° F] | 220
[428] | 285
[545] | | Water
Washout (ASTM D-1264) 79° C [175° F] % loss | 15
max | 5.1 |
| Oil Separation
(ASTM D-1742) 24 hr. @ 25° C [77° F], % loss | 10
max | 2.8 |
| Rust Protection
(ASTM D-1743) | pass | pass |
| Timken OK Load
Test (ASTM D-2509), lbs. | NR* | 60 |
| Fortified with
Moly Compound | NR* | no |
| Four Ball Wear
Test (ASTM D-2266) Wear Scar Diameter, mm | 0.9
max | 0.32 |
| Compatibility
with other greases | NR* | excellent |
| Extreme Pressure,
Four Ball Method (ASTM D-2596) Weld Point, kgf | 200
min | 400 |
| Extreme Pressure,
Four Ball Method (ASTM D-2596) Load Wear Index, kgf | 30
min | 65 |
| High Temperature
Life (ASTM D-3527) hours | 80
min | 300 |
| Fretting Wear
(ASTM D-4170)* mg | 10
max | 3.4 |
| Elastomer Compatibility
(ASTM D-4289) Volume Change, %, GC | -5
to +30 | 21.6 |
| Elastomer Compatibility
(ASTM D-4289) Volume Change, %, LB | 0
to +30 | 9.88 |
| Elastomer Compatibility
(ASTM D-4289) Hardness Change, durometer-A points, GC | +2
to -15 | -3 |
| Elastomer Compatibility
(ASTM D-4289) Hardness Change, durometer-A points, LB | 0
to -10 | -6 |
| Leakage (ASTM
D-4290), G* | 10
max | 6.0 |
| Low Temperature
Torque (ASTM D-4693) n·m, max @ -40° C [-40° F] | 15.5 | 2.3 |
| Water Spray
Off (ASTM D-4049), % max | NR* | 22.7 |
| *
NR: Not Required for NLGI GC or LB labeling | |
