|
AMSOIL Synthetic Powershift Transmission Fluids are Recommended for Applications
Requiring the Following Specifications: - Caterpillar TO-4
- Allison
C-4
- HD Torque and Drivetrain
- Eaton Fuller CD-30 (SAE 30)
- Eaton
Fuller CD-50 (SAE 50)
AMSOIL Synthetic Powershift Transmission Fluids
are specifically designed for heavy-duty powershift transmissions. Formulated
for extended drain intervals, AMSOIL Synthetic Powershift Transmission Fluids
contain top-quality synthetic basestocks and a high level of top-quality additives
selected specifically for powershift transmission performance. They offer unmatched
transmission friction performance, smooth brake operation, reduced gear and bearing
wear and increased equipment life. AMSOIL Synthetic Powershift Transmission Fluids
extend time between overhauls. AMSOIL Synthetic SAE 50 Powershift Transmission
Fluid exceeds Fuller CD-50 performance specification and is ideal for use in Fuller,
Rockwell, Spicer, Fabco, Warner and other large truck manual transmissions. Friction
Characteristics
AMSOIL Synthetic Powershift Transmission Fluids are compatible
with common metallic and nonmetallic friction materials. AMSOIL Synthetic Powershift
Transmission Fluids' stable frictional characteristics eliminate the problems
of excessive brake noise and vibration, clutch slippage, friction surface deposits
and design material degradation. AMSOIL Synthetic Powershift Transmission
Fluids are formulated for fast, smooth clutch engagements and wet brake operations;
excellent power transmission through clutches and synchronizers; and superior
hydraulic fluid performance for servo equipped units. Wear Protection
AMSOIL Synthetic Powershift Transmission Fluids exceed the wear requirements
of the Caterpillar TO-4 specification. AMSOIL Synthetic Powershift Transmission
Fluids are formulated without viscosity index improvers for superior shear stability.
They maintain grade throughout service life, due to their superior shear stability,
providing long-term protection against equipment wear, even when equipment is
frequently subjected to sustained periods of applied pressure or high horsepower
and high torque. High and Low Temperature Performance
In high
temperatures, AMSOIL Synthetic Powershift Transmission Fluids dependably protect
components from wear. Their superior oxidative and thermal stability inhibits
the formation of varnish, deposits and sludge so equipment runs clean. AMSOIL
Synthetic Powershift Transmission Fluids are excellent heat transfer fluids and
may help hot-running equipment operate up to 50° F cooler and keep them running
in their optimal temperature range. In low temperatures, AMSOIL Synthetic Powershift
Transmission Fluids flow readily for dependable startup and post-startup protection. Copper
Corrosion, Rust and Foam Inhibition
AMSOIL Synthetic Powershift Transmission
Fluids protect equipment from copper corrosion and rust, even during equipment
storage. AMSOIL Synthetic Powershift Trans- mission Fluids do not foam in service,
protecting equipment from the metal-to-metal contact and wear that occurs with
use of foam-filled fluids. Installation
AMSOIL Synthetic Powershift
Transmission Fluids are fully compatible with other fluids used in powershift
applications. To install AMSOIL Synthetic Powershift Transmission Fluids, drain
the fluid in the system,, replace the filter (if so equipped) and install the
appropriate AMSOIL Synthetic Powershift Transmission Fluid. Service Life
AMSOIL Synthetic Powershift Transmission Fluids provide two to five times the
service life of conventional petroleum fluids if AMSOIL Synthetic Powershift Transmission
Fluids are kept free of dirt and moisture. AMSOIL Synthetic Powershift Transmission
Fluids may be used for 250,000 miles or five years (whichever comes first) in
manual transmissions. AMSOIL Limited Warranty
Typical
Technical Properties | |
AMSOIL SAE 10W, 30 and 50 Synthetic
Powershift Transmission Fluids (CTG, CTJ, CTL) |
| Product Code | CTG | CTJ | CTL |
| SAE Viscosity Grade | 10W | 30 | 50 |
| ISO Viscosity Grade | 32 | 68 | 150 |
| Kinematic Viscosity @ 100° C, cSt (ASTM D-445) | 6.3 | 11.1 | 18.6 |
| Kinematic Viscosity @ 40° C, cSt (ASTM D-445) | 34.9 | 77.5 | 151.6 |
| Viscosity Index (ASTM D-2270) | 131 | 132 | 138 |
| Flash Point °C (°F) (ASTM D-92) | 252
(486) | 254 (489) | 268
(514) | | Fire Point °C (°F) (ASTM D-92) | 272
(522) | 278 (532) | 296
(565) | | Pour Point °C (°F) (ASTM D-97) | -54
(-65) | -43 (-45) | -36
(-33) | | Four Ball Wear Test 40 kg. 75°C, 1200 rpm,
1 hour (ASTM D-4172 B) | 0.35 | 0.35 | 0.35 |
| Noack 250°C, 1 hour, percent weight loss (DIN 51581) | 5.8 | 4.8 | 5.2 |
|
